FlyLine

Fly cut – G823 command in contour will activate the Fly cut in TC_UPDATE_PARAM as 4^th parameter Bit0=1.

LST format	DIN format
G01 X0 Y-9.526 G823 (contour contains G823, Fly cut active)	TC_UPDATE_PARAM R[5;0;100;1;0;0]

LST format

DIN format

G01 X0 Y-9.526 G823 (contour contains G823, Fly cut active)

TC_UPDATE_PARAM R[5;0;100;1;0;0]